Cruising Sailors want More! More Power, Bigger Tenders, More stuff! Our new Sch 80 Mark2 Sail Arch meets those needs, with a Larger extended truss to provide increased resistance to lateral motion and the ability to easily handle a grid system with up to four large solar panels for morethan 1600 watts of solar. Plus all of our accessories, Tender Handler, Kayak/Paddleboard racks, Starlink antennas, Motor Cranes and more
Standard Sail Arch, distance between forward legs and after legs is the same
InLine
Mounting Centers Inches
Forward Legs
After Legs
Minimum
Maximum
Minimum
Maximum
TIB101/02
Sail Arch Standard Schedule 40
TIB24350
78
94
78
94
$2,800.00
TIB24400
90
106
90
106
$2,800.00
TIB24500
102
118
102
118
$2,900.00
TIB24600
114
130
114
130
$3,000.00
TIB101/02SPO1
Sail Arch HiCapacity Schedule 80
TIB24350
78
94
78
94
$3,500.00
TIB24400
90
106
90
106
$3,500.00
TIB24500
102
118
102
118
$3,600.00
TIB24600
114
130
114
130
$3,700.00
TIB101/02MK2
Mark 2 Sail Arch HiCapacity Schedule 80
TIB24350
78
94
78
94
$4,100.00
TIB24400
90
106
90
106
$4,100.00
TIB24500
102
118
102
118
$4,200.00
TIB24600
114
130
114
130
$4,300.00
TIB24650
126
142
126
142
$4,500.00
TIB101/02SPO2
Sail Arch HiCapacity Schedule 80
Extra Wide
TIB24400
128
142
128
142
$4,000.00
TIB24500
140
154
140
154
$4,100.00
TIB24600
152
166
152
166
$4,200.00
TIB24650
164
178
164
178
$4,400.00
TIB101/02SPOMK2
Mar 2 Sail Arch HiCapacity Schedule
80 Extra Wide
TIB24400
128
142
128
142
$4,500.00
TIB24500
140
154
140
154
$4,600.00
TIB24600
152
166
152
166
$4,700.00
TIB24650
164
178
164
178
$4,900.00
Offset
Mounting Centers
Inches
Forward Legs
After Legs
Minimum
Maximum
Minimum
Maximum
TIB1015/025
Sail Arch Standard Schedule 40 Legs Offset
TIB24350
78
90
68
80
$2,900.00
TIB24400
90
106
80
96
$2,900.00
TIB24500
102
118
92
108
$3,000.00
TIB24600
114
130
104
120
$3,100.00
TIB1015/025SPO1
Sail Arch HiCapacity
Schedule 80 Legs Offset
TIB24350
78
90
68
80
$3,600.00
TIB24400
90
106
80
96
$3,600.00
TIB24500
102
118
92
108
$3,700.00
TIB24600
114
130
104
120
$3,800.00
TIB1015/025MK2
Mark 2 Sail Arch HiCapacity Schedule 80 Legs Offset
TIB24350
80
90
68
80
$4,100.00
TIB24400
90
106
80
96
$4,200.00
TIB24500
102
118
92
108
$4,300.00
TIB24600
114
130
104
120
$4,400.00
TIB1017/1027SPO1
Sail Arch HiCapacity
Schedule 80 Xtra Wide Legs Offset
TIB24400
116
144
106
134
$4,000.00
TIB24500
128
156
118
146
$4,100.00
TIB24600
140
168
130
158
$4,200.00
TIB24650
152
180
142
170
$4,400.00
TIB1017/1027SPO1MK2
Mark 2 Sail Arch HiCapacity Schedule 80 Xtra Wide Legs Offset
For Sailors, the "Tower in a Box" Arch from Atlantic Towers is designed to mount to the deck, transom, hull sides or a combination. The approximate 30 degree angle, clears most existing biminis, back stays, and pushpits. Mounting hardware (feet) is shipped loose and epoxied and screwed into the legs at the time of installation. The legs may be trimmed for the best overall height, and at unequal lengths to facilitate installation. There is a choice of mounting hardware, with 3.5" or 2" diameter bases. Our proprietary pin and pad mounting system accommodates any angled mounting surface.
Telescoping design allows adjustment to fit many different transoms and applications.
High Strength welded frame of schedule 40 marine grade aluminum pipe nearly 2" in diameter, with secondary reinforcement of nearly 1 3/8" in diameter finished in durable salt resistant bright clear anodizing
The Arch has the appearance and strength of a custom welded unit when installed on your boat. It weighs less than 100 pounds, and is strong enough to support the weight of two persons for the installation of equipment.
Every Arch includes a large (approximately 12" x 12") radar plate, plus four 4" wide mounting plates which will accommodate up to six additional antennas. Radar cables, antenna cables and other wiring may be concealed inside the frame The Arch is mounted to your boat in four locations with our proprietary "Pin & Pad" mounting hardware. These fittings have nylon bushings which help isolate any vibration in the Arch from the fiberglass surface of your boat. The "Pin & Pad" fittings also allow mounting to any angled surface, and easy dismounting of the arch (just remove the four 3/8" bolts) for storage or transport. You have a choice of 3-1/2" 5 bolt bases click here for details, or 2" diameter 2 bolt bases click here (new page, Kit #6 detail) Cupped feet, to allow direct pass thru of electrical cables are available at additional cost.
Everything is included for a complete installation on most boats, even backing plates along with instructions and a video detailing all the steps of the installation.
New for Spring 2015, "Tower In A Box" arch bridges include a snap-in Sintra cover panel in radar plate to conceal wiring. A feature borrowed from our Custom Structures.
:
Available Options:
Atlantic Towers manufactures a wide variety of fittings and specialty hardware that allow Sail Arch owners to design and build a variety of individualized applications. Including Solar Panel array supports. Davit arms, lifting eyes, outboard motor brackets, etc.
Tender Handler: $1799
A growing number of cruising yachts are using Tower in a Box® stern mounted arches to mount
solar panel arrays and lift their tender. Frequently arches cannot be mounted sufficiently far aft
to provide a straight “pick” when lifting the tender and the tendered needs to dragged up and
over the sugar scoop or extended platform to raise it into a secure position under the arch. The
“Tender Handler” option provides “reach” to lift the tender from the water behind a sugar scoop transom or extended swim platform and then bring it high and close to the yacht under the arch, where it can be secured for navigation. The unique design feature is the articulated pivot at the connection of the “Tender Handler” frame to the arch, eliminating the need for perfect alignment and ensuring smooth operation.
Clamp on Wind Generator Base & Mast KIT77000 - Top Mount: $499 KIT77700 - Side Mount: $399
Wind Generator Base and Mast can be clamped anywhere on the top of your arch. Comes with a 40' length of 1 1/2" Schd.40 which can be permanently fitted into the receiver with two part epoxy, or made removable with the use of machine screws or quick release pins. The 1.90" outer diameter of the 1 1/2" schd.40 pipe fits many popular wind generators.
KIT78000 Clamp Assembly/Lifting Eye. Sold as pairs $219
An extruded anodized aluminum clamp assembly that can be used to secure a lifting tackle to the arch.
KIT79000 Extension davits. Sold as pairs $699
Can be mounted to top of arch to extend the "pick point" of the lifting eyes up to 24" behind arch. Includes two 42" Schd.80 extensions, end caps, curved washers, clamp assembly lifting eyes, and all hardware needed for installation. Some drilling required.
KIT76000 Solar Panel Mounting Kit $319
Allows you to mount solar panels anywhere on your arch. Kit contains (2) 65" lengths of 1" x 2" x 1/8" rectangular aluminum tube, (4) plastic end caps, (8) Curved Washers, and all hardware needed for installation. Some Drilling Required
Custom Solar Panel Mounts. We offer a full line of parts and accessories that can be combined to create your own custom mounting solution. For pricing and more information please call 1-800-831-8889
AJ30500 Adjust-O-Launcher Need more rod holders? Individual Adjust-O-Launcher aluminum rod holders can be mounted anywhere on the perimeter of the Sail Arch framework. A unique patented design available exclusively from Atlantic Towers, manufactured from all aluminum in natural aluminum or gold anodized finish Adjust-O-Launchers can be pivoted thru 12 positions for unmatched flexibility. Fits all marine standard 1-1/2” pipe (1.90” o.d.) AJ30500C Clear Anodizing: $129.00
AJ30500G Gold Anodizing: $159.00
Clamp on Cleat $129
An extruded anodized aluminum clamp allows you to add a cleat anywhere on your Atlantic Towers Sail Arch.
Kayak or Paddleboard Rack
Made from 1 1/2" schd. 40 anodized aluminum pipe with an outer diameter measuring 1.9" and features eye bolts for tying down equipment along with grip rail to prevent any slipping or damage. With three different clamp on or bolt on versions available, the rack can be clamped or bolted to existing arches, hardtops, davit systems, bow rails, and foredecks.
Bolt on Rack: $449
Clamp on Rack: $389
Can I install the Arch myself?
The Arch was designed for owner installation and is typically no more complicated than installing rod holders or outriggers, just a few more pieces. If you are comfortable with hand tools, the Arch comes with instructions and all the backing plates and hardware required for a thru bolted installation. (Don’t want to install the Arch yourself? Check our “Services” page for professional installers with whom our customers have had a good experience)
How is the Arch shipped to me? Although the Arch is not heavy it is too large to go by UPS. We have discounted freight arrangements with several trucking companies, which cover all 48 states and Canada. We can also ship to Alaska, Hawaii and any overseas city, call us for details. The Arch is packed in a single large cardboard carton and normally ships to a commercial address
What happens if my Arch is damaged in shipping?
Atlantic Towers wants you to enjoy your boat, not spend the season chasing a freight claim. If your Arch arrives damaged, just refuse the shipment and we will send you a new one at no additional cost to you.
Can I return my Arch if I decide I don’t want to keep it?
Atlantic will accept the return of any Standard Structure within 30 days of it’s receipt by you. Simply return the Structure in the original packaging in new condition freight pre-paid and we will refund the purchase price less a 10% restocking fee
Is my Arch guaranteed?
Yes, for 5 years, see the warranty section of our website for details.
**NOTE: There is a 10% re-stocking charge for cancelled or returned merchandise**
Due to our dedication to continued product improvement, we reserve the right to make changes without notice.
For Sailors, the "Tower in a Box" Arch from Atlantic Towers is designed to mount to the deck, transom, hull sides or a combination. The approximate 30 degree angle, clears most existing biminis, back stays, and pushpits. Mounting hardware (feet) is shipped loose and epoxied and screwed into the legs at the time of installation. The legs may be trimmed for the best overall height, and at unequal lengths to facilitate installation. There is a choice of mounting hardware, with 3.5" or 2" diameter bases. Our proprietary pin and pad mounting system accommodates any angled mounting surface.
